TA-03 48 x 48 in square plastic pallet, closed-loop, high capacity
Closed-loop

TA-03 · High capacity for closed-loop operations

1,200 × 1,200 × 150 mm (48" × 48") · HDPE with recycled content · 27.2 kg

Designed for recurring handling of uniform loads: cases, drums, pails, jugs and kegs. Up to 1,800 kg in motion, 10,000 kg static and 700 kg in racking with center support.

Operating conditions

Racking

Up to 700 kg, and requires center support. Without that support, do not use it in racks.

Load type

Designed for uniformly distributed loads: corrugated cases, drums, pails, jugs and kegs.

Stacking

Suitable for block stacking of uniform loads. The number of tiers depends on the product, packaging, load pattern and support conditions of each operation.

Food-contact version

Available in 100% virgin material for applications that require a food-contact-grade formulation, subject to the resin specification, conditions of use and the corresponding compliance documentation.

Length (L)

Width (W)

Height (H)

Max Static Load

Max Dynamic Load

Max Rack Load

Weight

47.24 in

47.24 in

5.90 in

22,046 lb

3,968 lb

1,543 lb

59.96 lb

Length (L)

47.24 in

Width (W)

47.24 in

Height (H)

5.90 in

Max Static Load

22,046 lb

Max Dynamic Load

3,968 lb

Max Rack Load

1,543 lb

Weight

59.96 lb

Length (L)

Width (W)

Height (H)

Max Static Load

Max Dynamic Load

Max Rack Load

Weight

1,200 mm

1,200 mm

150 mm

10,000 kg

1,800 kg

700 kg

27.2 kg

Length (L)

1,200 mm

Width (W)

1,200 mm

Height (H)

150 mm

Max Static Load

10,000 kg

Max Dynamic Load

1,800 kg

Max Rack Load

700 kg

Weight

27.2 kg

Capacity of 432 pallets in a standard U.S. truck (48 ft)

Capacity of 468 pallets in a standard U.S. truck (53 ft)

Capacity of 432 pallets in a standard U.S. truck (48 ft)

Capacity of 468 pallets in a standard U.S. truck (53 ft)

For more technical information about the TA-03, download the Technical Data Sheet

Configuration and options

Capacities apply to uniformly distributed loads on a new pallet and depend on support, handling and operating conditions.
Material HDPE with recycled content
Handling Forklift and hydraulic pallet jack from all four sides; not compatible with electric pallet jacks
Options RFID, color choice and custom marking

Features

High load capacity

Up to 1,800 kg in motion and 10,000 kg static, within the specified loading conditions.

Rackable with center support

Up to 700 kg per position when the rack level has a center support or wire deck.

Optimized for uniform loads

Corrugated cases, drums, pails, jugs and kegs evenly distributed across the deck.

Built for recurring operations

Designed for supply chains where the pallet is recovered and reused between defined points.

Identification and traceability

RFID, color choice and custom marking to tell assets, areas or customers apart.

Industrial-grade HDPE

High-density polyethylene with recycled content, resistant to impact, moisture and UV.

Advantages

One pallet for several logistics stages

Move, stack and store in racking with center support without changing platforms along the process.

Reliable strength for demanding operations

High capacity for uniform loads within the specified operating conditions.

Designed for reuse in a closed loop

The asset goes back into the operation instead of being treated as a single-trip platform.

Easy cleaning, low moisture absorption

Non-porous, easy-to-clean surface, important in industries where equipment hygiene is part of the procedure.

No splinters or nails

Unlike a worn wood pallet, it reduces packaging damage and handling hazards.

100% virgin material option

For applications that require a food-contact-grade formulation, subject to specification and documentation.

Applications

  • Floor storage and block stacking of uniform loads
  • Racking with center support, up to 700 kg per position
  • Internal material movement with pallet jacks and forklifts
  • Returnable loops between plants, warehouses and distribution centers
  • Handling of drums, pails, jugs and kegs
  • Operations with RFID asset tracking

Industries

Final suitability should be assessed based on the load, rack type and conditions of each operation.

Is this the right model for your operation?

The TA-03 is the 48" × 48" square format for pallet jack and forklift handling. If your operation has other priorities, these models are a better fit.

I need more rack capacity

See TA-20 Reinforced

I work with the 48" × 40" format

See TA-07

I handle everything by forklift and need a double-sided pallet

See TA-04

The pallet does not come back: it is for export

See TA-32

Frequently asked questions

Its 700 kg rack rating applies when the rack level has a crossbar or wire deck that shortens the unsupported span. On beam racking without center support the pallet rests only on its ends, and the published rating does not apply.

Both share the 48" × 48" square format. The TA-03 is single-faced and handled with pallet jacks and forklifts; the TA-04 is double-sided and handled by forklift only.

The standard version includes recycled content. For food-contact applications there is a 100% virgin material version, with the corresponding specification and documentation.

A load whose weight is spread evenly across the whole pallet deck, such as properly arranged corrugated cases. Published capacities are determined under that condition and do not apply to point or concentrated loads.

Yes. The TA-03 accepts RFID, plus custom marking and a choice of colors to tell assets, flows or customers apart within the loop.

Can’t find what you’re looking for?

We’ll help you find just what you need

Download the Catalog

Share your email address with us, and we will send you our product catalog.