TA-200 Family · Racking, automation and traceability
Metric 1,000 × 1,200 mm or 1,016 × 1,219 mm (40" × 48") format · Eight configurations
Strength, stability and control for logistics that never stop. Up to 1,700 kg in motion, 8,500 kg static, 1,000 kg in selective racking and 900 kg in drive-in, with solid performance on roller and chain conveyors.
Operating conditions
1,000 kg in selective racking and 900 kg in drive-in racking, with a uniformly distributed load. For push-back or flow systems, validate the configuration with our technical team.
1,000 × 1,200 mm: metric format, for operations and racks sized in millimeters.
1,016 × 1,219 mm (40" × 48"): the dominant format in North America, around which the region’s selective racking is designed.
Perimeter base: full perimeter frame, with continuous support all around.
Runners: cross members instead of a full perimeter; the lightest configuration in the family, between 21.5 and 22.4 kg.
The reinforced versions do not increase the published capacity over the perforated ones: both carry the same ratings, with less than 1 kg difference in weight. In terms of capacity, both are equivalent.
|
Length (L) |
Width (W) |
Height (H) |
Max Static Load |
Max Dynamic Load |
Max Rack Load |
Weight |
|---|---|---|---|---|---|---|
|
40 in |
48 in |
5.87 in |
18,700 lb |
3,748 lb |
Selective 2,200 lb · Drive-in 1,984 lb |
47.35 to 55.56 lb depending on configuration |
Length (L)
40 in
Width (W)
48 in
Height (H)
5.87 in
Max Static Load
18,700 lb
Max Dynamic Load
3,748 lb
Max Rack Load
Selective 2,200 lb · Drive-in 1,984 lb
Weight
47.35 to 55.56 lb depending on configuration
|
Length (L) |
Width (W) |
Height (H) |
Max Static Load |
Max Dynamic Load |
Max Rack Load |
Weight |
|---|---|---|---|---|---|---|
|
1,016 mm |
1,219 mm |
149 mm |
8,500 kg |
1,700 kg |
Selective 1,000 kg · Drive-in 900 kg |
21.48 to 25.20 kg depending on configuration |
Length (L)
1,016 mm
Width (W)
1,219 mm
Height (H)
149 mm
Max Static Load
8,500 kg
Max Dynamic Load
1,700 kg
Max Rack Load
Selective 1,000 kg · Drive-in 900 kg
Weight
21.48 to 25.20 kg depending on configuration
Capacity in a standard U.S. truck (48 ft / 53 ft):
TA-200 and TA-201: 504 / 540 pallets · TA-203, TA-204, TA-220, TA-221, TA-223 and TA-224: 500 / 510 pallets
Capacity in a standard U.S. truck (48 ft / 53 ft):
TA-200 and TA-201: 504 / 540 pallets · TA-203, TA-204, TA-220, TA-221, TA-223 and TA-224: 500 / 510 pallets
The 12 models in the TA-200 family
All share the same capacities. What changes is the format, the bottom structure and the equipment used to handle them. Each model has its own link: copy the link in its row to share it.
- Dynamic load 1,700 kg
- Static load 8,500 kg
- Selective racking 1,000 kg
- Drive-in racking 900 kg
| Reference | Format | Bottom structure | Handling | Weight |
|---|---|---|---|---|
| TA-200 # | 1,000 × 1,200 mm | Perimeter base | Pallet jack and forklift | 24.55 kg |
| TA-201 # The lightest in the family | 1,000 × 1,200 mm | Runners | Pallet jack and forklift | 21.48 kg |
| TA-220 # | 1,000 × 1,200 mm | Perimeter base · reinforced | Pallet jack and forklift | 24.85 kg |
| TA-221 # | 1,000 × 1,200 mm | Runners · reinforced | Pallet jack and forklift | 22.25 kg |
| TA-203 # | 1,016 × 1,219 mm (40" × 48") | Perimeter base | Pallet jack and forklift | 24.75 kg |
| TA-204 # | 1,016 × 1,219 mm (40" × 48") | Runners | Pallet jack and forklift | 22.23 kg |
| TA-223 # | 1,016 × 1,219 mm (40" × 48") | Perimeter base · reinforced | Pallet jack and forklift | 25.20 kg |
| TA-224 # | 1,016 × 1,219 mm (40" × 48") | Runners · reinforced | Pallet jack and forklift | 22.40 kg |
| TA-202 # | 1,000 × 1,200 mm | Double-sided | Forklift only | 28.30 kg |
| TA-222 # | 1,000 × 1,200 mm | Double-sided · reinforced | Forklift only | 28.83 kg |
| TA-205 # | 1,016 × 1,219 mm (40" × 48") | Double-sided | Forklift only | 28.75 kg |
| TA-225 # | 1,016 × 1,219 mm (40" × 48") | Double-sided · reinforced | Forklift only | 28.90 kg |
- Format
- 1,000 × 1,200 mm
- Bottom structure
- Perimeter base
- Handling
- Pallet jack and forklift
- Weight
- 24.55 kg
- Format
- 1,000 × 1,200 mm
- Bottom structure
- Runners
- Handling
- Pallet jack and forklift
- Weight
- 21.48 kg
- Format
- 1,000 × 1,200 mm
- Bottom structure
- Perimeter base · reinforced
- Handling
- Pallet jack and forklift
- Weight
- 24.85 kg
- Format
- 1,000 × 1,200 mm
- Bottom structure
- Runners · reinforced
- Handling
- Pallet jack and forklift
- Weight
- 22.25 kg
- Format
- 1,016 × 1,219 mm (40" × 48")
- Bottom structure
- Perimeter base
- Handling
- Pallet jack and forklift
- Weight
- 24.75 kg
- Format
- 1,016 × 1,219 mm (40" × 48")
- Bottom structure
- Runners
- Handling
- Pallet jack and forklift
- Weight
- 22.23 kg
- Format
- 1,016 × 1,219 mm (40" × 48")
- Bottom structure
- Perimeter base · reinforced
- Handling
- Pallet jack and forklift
- Weight
- 25.20 kg
- Format
- 1,016 × 1,219 mm (40" × 48")
- Bottom structure
- Runners · reinforced
- Handling
- Pallet jack and forklift
- Weight
- 22.40 kg
- Format
- 1,000 × 1,200 mm
- Bottom structure
- Double-sided
- Handling
- Forklift only
- Weight
- 28.30 kg
- Format
- 1,000 × 1,200 mm
- Bottom structure
- Double-sided · reinforced
- Handling
- Forklift only
- Weight
- 28.83 kg
- Format
- 1,016 × 1,219 mm (40" × 48")
- Bottom structure
- Double-sided
- Handling
- Forklift only
- Weight
- 28.75 kg
- Format
- 1,016 × 1,219 mm (40" × 48")
- Bottom structure
- Double-sided · reinforced
- Handling
- Forklift only
- Weight
- 28.90 kg
All twelve models share the same capacities: the choice is not about capacity but about format, bottom structure and handling equipment. Reinforced versions do not carry a higher rated capacity than the perforated ones. Values for uniformly distributed loads on a new pallet.
Available configurations
| Material | High-impact copolymer resin, UV resistant |
|---|---|
| Automation | Compatible with roller and chain conveyors |
| Handling | Hydraulic pallet jack, electric pallet jack and forklift, from all four sides |
| Options | RFID and custom marking |
Features
Automation-ready
Solid performance on roller and chain conveyors and in automated material handling systems.
Rack rating by system
1,000 kg in selective racking and 900 kg in drive-in, with a uniformly distributed load.
Two formats available
Metric 1,000 × 1,200 mm or 1,016 × 1,219 mm (40" × 48"), covering both standards with the same product.
Reinforced clip system
A clip system that keeps the assembly consistent and improves impact performance.
UV-resistant resin
High-impact copolymer resin, relevant for yards, loading docks and indoor-outdoor transfers.
Optional traceability
RFID compatible, with optional custom marking to manage the pallet as a returnable asset.
Advantages
Designed to come back and work again
For loops where strength, repeatability and asset control are essential.
From racking to the automated line
A versatile platform for storage, industrial handling, conveyors and automated systems.
More than a pallet: a traceable asset
RFID and marking identify movements, returns and location across the supply chain.
The configuration your operation needs
Metric or 40" × 48" format, perimeter base or runners, in perforated or reinforced versions.
Stability when stacked
Stable behavior when empty or loaded pallets are stacked on top of each other.
An export advantage
As a plastic pallet it falls outside the phytosanitary treatments that ISPM 15 applies to wood packaging.
Applications
- Automated processes with roller and chain conveyors
- Selective and drive-in rack storage
- Reverse logistics and returnable loops
- Internal transport of industrial loads
- Operations with RFID asset tracking
- Operations with outdoor exposure
Industries
Recommended commercial priority: automotive and auto parts, manufacturing, logistics and 3PL, food and beverages, pharmaceutical.
Is this the right model for your operation?
The TA-200 family comes in eight configurations compatible with pallet jacks and forklifts. Three questions determine the right one.
Does your operation use the metric 1,000 × 1,200 mm format or 40" × 48"? Metric: TA-200, TA-201, TA-220, TA-221 · 40" × 48": TA-203, TA-204, TA-223, TA-224
What type of racking do you use? Selective: 1,000 kg per position · Drive-in: 900 kg per position
Do you handle the pallet with a pallet jack or with forklifts only? Forklift only: consider the double-sided configurations
I need 1,500 kg in racking
I need more static capacity
Frequently asked questions
Yes. It is its main differentiator: it is designed to work in automated material handling systems and performs well on roller and chain conveyors. Specific integration must be validated against the installed equipment.
Because the structural demand is not the same: in drive-in racking the pallet is supported differently than in selective racking. It is the only family in the catalog with that distinction published.
Twelve. Eight are compatible with pallet jacks and forklifts, and four are double-sided and handled by forklift only. The comparison table on this page lists them all with their format, bottom structure and weight.
No: it carries the same ratings as the perforated version. In terms of capacity, both are equivalent.
The metric 1,000 × 1,200 mm format if your racking and container infrastructure is sized in millimeters; the 1,016 × 1,219 mm (40" × 48") format if you operate under the North American standard.
Can’t find what you’re looking for?
We’ll help you find just what you need
Request more information about our pallets for your business.
Complete our form, and one of our experts will get in touch with you.
Related Products
TA-100
-
Dimensions
40 X 48 in
-
Weight
23.3 kg
-
Static Load
15,000 kg
-
Dynamic Load
1,500 kg
-
Rack Load
1,500 kg
TA-01
-
Dimensions
40 X 48 in
-
Weight
16.8 kg
-
Static Load
8,000 kg
-
Dynamic Load
1,300 kg
-
Rack Load
500 kg
TA-50
-
Dimensions
37 X 37 in
-
Weight
17.6 kg
-
Static Load
12,000 kg
-
Dynamic Load
2,000 kg
-
Rack Load
1,100 kg
TA-20
-
Dimensions
48 X 40 in
-
Weight
26.5 kg
-
Static Load
15,000 kg
-
Dynamic Load
1,700 kg
-
Rack Load
1,500 kg
Download the Catalog
Share your email address with us, and we will send you our product catalog.