TA-30 One-Way 48 x 40 in lightweight nestable plastic pallet for export
Lightweight and one-way export

TA-30 One-Way Family · Lightweight, nestable export pallets

1,010 × 1,210 mm (48" × 40") · HDPE with recycled content · Eleven configurations

Efficiency that travels with you. A capacity ladder from 1,000 kg dynamic in the base TA-30 up to 1,600 kg in the closed-deck configuration with perimeter base, with weights between 7.25 and 11.95 kg.

Operating conditions

No configuration is suitable for racking

None of the eleven configurations in the TA-30 family is suitable for rack storage. When the operation requires racking, the right solution is in the closed-loop lines.

The bottom structure defines the capacity

No bottom structure (13.0 cm): 7.25 to 8.5 kg, up to 1,000 kg dynamic (1,200 kg with closed deck).
Runners (14.6 cm): 9.7 to 11 kg, 1,200 kg dynamic perforated and 1,400 kg closed.
Perimeter base (14.6 cm): 10.65 to 11.95 kg, 1,300 kg dynamic perforated and 1,600 kg closed.

In one-way pallets, a closed deck does raise capacity

Unlike the closed-loop lines, in this family the closed deck also raises capacity, by 200 to 300 kg of dynamic load depending on the bottom structure.

Export

As a plastic pallet, it is not subject to the phytosanitary treatment or marking that NOM-144-SEMARNAT-2017 and ISPM 15 require for wood packaging used in international trade.

Length (L)

Width (W)

Height (H)

Max Static Load

Max Dynamic Load

Max Rack Load

Weight

47.6 in

39.7 in

5.11 in

2,204 lb

2,204 lb

NA

15.98 lb

Length (L)

47.6 in

Width (W)

39.7 in

Height (H)

5.11 in

Max Static Load

2,204 lb

Max Dynamic Load

2,204 lb

Max Rack Load

NA

Weight

15.98 lb

Length (L)

Width (W)

Height (H)

Max Static Load

Max Dynamic Load

Max Rack Load

Weight

1,210 mm

1,010 mm

130 mm

1,000 kg

1,000 kg

NA

7.25 kg

Length (L)

1,210 mm

Width (W)

1,010 mm

Height (H)

130 mm

Max Static Load

1,000 kg

Max Dynamic Load

1,000 kg

Max Rack Load

NA

Weight

7.25 kg

Capacity in a standard U.S. truck (48 ft / 53 ft):

TA-30: 1,680 / 1,800 pallets · TA-31, TA-32 and TA-38: 504 / 540 · TA-33, TA-34, TA-35, TA-36, TA-37, TA-40 and TA-41: 1,800 / 1,950

Capacity in a standard U.S. truck (48 ft / 53 ft):

TA-30: 1,680 / 1,800 pallets · TA-31, TA-32 and TA-38: 504 / 540 · TA-33, TA-34, TA-35, TA-36, TA-37, TA-40 and TA-41: 1,800 / 1,950

For more technical information about the TA-30, download the Technical Data Sheet

Available configurations

Capacities apply to uniformly distributed loads on a new pallet and depend on support, handling and operating conditions.
TA-30 · perforated, no bottom structure # 7.25 kg · 1,000 kg dyn. · 1,000 kg stat.
TA-33 · perforated with lip, no bottom structure # 7.30 kg · 1,000 kg dyn. · 1,000 kg stat.
TA-31 · perforated, runners # 9.74 kg · 1,200 kg dyn. · 1,600 kg stat.
TA-34 · perforated with lip, runners # 9.79 kg · 1,200 kg dyn. · 1,600 kg stat.
TA-32 · perforated, perimeter base # 10.65 kg · 1,300 kg dyn. · 1,800 kg stat.
TA-35 · perforated with lip, perimeter base # 10.70 kg · 1,300 kg dyn. · 1,800 kg stat.
TA-36 · closed, no bottom structure # 8.50 kg · 1,200 kg dyn. · 1,200 kg stat.
TA-37 · closed, runners # 10.99 kg · 1,400 kg dyn. · 2,000 kg stat.
TA-40 · closed with lip, runners # 11.04 kg · 1,400 kg dyn. · 2,200 kg stat.
TA-38 · closed, perimeter base # 11.90 kg · 1,600 kg dyn. · 2,200 kg stat.
TA-41 · closed with lip, perimeter base # 11.95 kg · 1,600 kg dyn. · 2,200 kg stat.
Material HDPE with recycled content

Features

The lightest in the catalog

The base TA-30 weighs 7.25 kg; the whole family ranges from 7.25 to 11.95 kg depending on configuration.

Lightweight and nestable

Designed to nest when empty, reducing the volume needed to store large quantities of pallets.

Capacity ladder

From 1,000 kg dynamic in the base configuration up to 1,600 kg in the closed deck with perimeter base.

Three bottom structures

No bottom structure, runners or a full perimeter base, depending on the capacity the operation needs.

Access from all four sides

Compatible with forklifts, hydraulic pallet jacks and electric pallet jacks.

Not rackable

No configuration in the family is suitable for rack storage.

Advantages

Export efficiency

Falls outside the material scope of the phytosanitary measures that NOM-144 and ISPM 15 direct at wood packaging.

Space optimization

The nestable design reduces the storage and transport volume of returns or packaging inventory.

Lower weight for a more agile operation

Significantly lighter than the closed-loop pallets in the portfolio, which makes handling easier.

Eleven configurations to match capacity

Choose the bottom structure and deck based on the actual load weight, without paying for capacity you will not use.

Built for logistics environments

HDPE resistant to impact, moisture and UV exposure in yards, warehouses and distribution processes.

Flexible 4-way handling

Approach with forklifts and different types of pallet jacks from four directions.

Applications

  • Export and import
  • One-way shipments with no pallet return
  • Order consolidation and cross-docking
  • Domestic distribution
  • Floor storage
  • Plant-to-plant transfers

Industries

Logistics, transportation and 3PL Export Manufacturing Retail Chemical Packaged food and beverages

Intended for operations where the pallet travels with the goods to their destination and its return is not part of the loop.

Is this the right model for your operation?

The family is defined by three variables: deck, bottom structure and perimeter lip. Three questions determine the configuration.

How much does the load you will move weigh? Up to 1,000 kg: no bottom structure · Up to 1,300 kg: runners or perimeter base · Over 1,300 kg: perimeter base with closed deck

Can your product drip, or is your packaging thin? Yes: closed line (TA-36 to TA-41) · No: perforated line (TA-30 to TA-35)

Does your load tend to shift during handling? Yes: with lip · No: no lip. The lip does not change capacity and adds 0.05 kg

I need the perimeter-base configuration for double stacking

See TA-32 Perforated with Perimeter Base

I need to store in racking

See closed-loop catalog

Frequently asked questions

None of the eleven. For racking, use the closed-loop lines.

The number identifies the combination of deck, bottom structure and lip. The configuration table on this page translates each code into its three choices, and each row has its own link.

Because in this family the top deck adds structural rigidity to the assembly. In the closed-loop lines, the deck is a process decision (drainage or containment) and does not change the ratings.

It helps retain the load on the platform and limit shifting during handling and transport. It does not change capacity and adds 0.05 kg.

It depends on the configuration, but it lets you store and return far more empty pallets in the same volume as a rigid pallet. It is the main argument for the one-way line.

Can’t find what you’re looking for?

We’ll help you find just what you need

Download the Catalog

Share your email address with us, and we will send you our product catalog.